How to clean and maintain the wireless vacuum cleaner?- Suzhou Royal cleanland Electric Co., Ltd.

In recent years, the gradual popularization of wireless vacuum cleaners has freed many families from the complicated cleaning work. Especially the upright vacuum cleaner can clean the ground, windowsill, crevice, roof, etc. of the whole house without any effort when using it, and it has been unanimously recognized by consumers.

However, although the vacuum cleaner is very simple and convenient to use, after a long time, it is still necessary to clean the dust bin of the vacuum cleaner and properly clean the filter element of the vacuum cleaner. I believe that many consumers have this feeling: after using the vacuum cleaner for a period of time, they will feel that the suction power has dropped significantly, and the vacuuming effect is not as good as before. When such problems occur, it means that the dust bin of the vacuum cleaner is full, or the filter element needs to be cleaned.

Dust removal is relatively simple. For example, Dibei's vacuum cleaners are basically designed to remove dust with one button. The cleaning of the filter element should be divided into specific materials. The filter elements of vacuum cleaners generally have the following types: Hypa, filter cotton, stainless steel filter cartridges, and non-woven fabrics. The recommended cleaning methods are as follows:

Hypa Cleaning:

Although Haipa is not absolutely forbidden to touch water, it is generally not recommended to wash with water. Frequent washing will affect the filtration and service life of Hypa. Usually, Hypa only needs to be gently cleaned with a dry brush. If it is particularly dirty, you can use a soft brush to gently wash it with water, but remember to fully dry it before putting it back on.

According to the frequency of use, we recommend replacing the Hypa every 3-6 months (generally, when the suction power is obviously insufficient, it means that the Hypa needs to be replaced). If you mind the replacement cost of consumables, you can choose a vacuum cleaner made of filter cotton.

Cleaning of non-woven fabrics:

In terms of filtration effect, the non-woven filter element is not as good as the 99% filtration effect of the general Hypa, but it is sufficient for general household use. Non-woven filter elements are usually used in lower-cost vacuum cleaners, and most vacuum cleaner brands are now deprecated.

In terms of cleaning methods, in principle, it is not recommended to wash with water, generally dry brushing is sufficient. If dry brushing can't solve it, you can wash it occasionally, but it must be fully dried before assembling. Otherwise, the moisture contained may damage the motor and seriously affect the filtering effect.

In addition, non-woven filter elements are consumable accessories, and like Hypa, they also need to be replaced frequently. Although the cost of the non-woven fabric itself is low, you can buy a large bundle for ten yuan, but the cost of each brand is relatively high after mold opening, customization, and production. Therefore, frequent replacement is also a cost that cannot be ignored.

And anyone who has used a vacuum cleaner knows that the filter element of the vacuum cleaner is not only very dirty, but also extremely stubborn, and it is impossible to clean it with simple water flushing or dry brushing. So over time, the dust accumulates more and more, and the natural filtering effect decreases. Therefore, we usually recommend that you choose a vacuum cleaner made of filter cotton.

Cleaning of the filter cotton:

A good feature of filter cotton is that it can be said to be three-dimensional compared to Hypa and non-woven fabrics. Hypa and non-woven fabrics only have a thin layer or layers, but the thickness of filter cotton is usually about 10mm. Like a small house that stores dust, the frequency of cleaning can naturally be a little longer.

Moreover, the filter device does not only have filter cotton. Taking the multi-stage cyclone filter system of Dibei wireless vacuum cleaner as an example, before the air enters the filter element, there are also filtration steps such as air inlet filtration, cyclone separation, and microporous filter cartridge separation. When the filter element is here, there are basically only very small dust particles left, which can achieve a good filtering effect, and the cleaning cycle of the filter element is also longer.

In terms of cleaning, the traditional filter cotton is wrapped in a hard plastic shell, which can only be simply washed with water, and cannot be rubbed and washed by hand, which is very inconvenient to clean. Therefore, most of Dibei's current vacuum cleaners have been updated to soft rubber-wrapped filter elements. Feel free to wash with water and rub as much as you like to meet the cleaning needs of various obsessive-compulsive disorder patients.

The cleaning is clean, the filtering effect is naturally better, and the cleaning frequency of the filter element is naturally reduced. Of course, it must be fully dried before reassembling!

As for the cleaning of other parts of the vacuum cleaner, it can be simply summarized into two points: electric and non-electric.

Accessories and casings that are not related to the motor can be washed with water. If it is inconvenient to wash with water, just wipe them with a damp cloth. Of course, it cannot be cleaned with destructive liquids and organic solvents such as gasoline alcohol caustic soda. It is recommended to use a mild detergent, such as soapy water, to basically solve the problem. Still remember to fully dry before assembling and using.

Parts with electricity, such as the main engine head with a motor, floor brushes, etc., can be wiped with a dry rag. Or wipe with a slightly damp rag to ensure that the motor part does not enter the water.

Suzhou Royal cleanland Electric Co., Ltd. was established in June 2016. It is a professional China strong suction stick vacuum cleaners manufacturers specializing in wholesale strong suction stick vacuum cleaners. The factory is located in Linhu Town, Wuzhong District, Suzhou City, which is located in the beautiful Taihu Lake. It covers an area of 9000 square meters and has 150 employees, including 30 engineering technicians and management personnel. As a famous OEM high suction bagless cyclone vacuum cleaners factory in China, the company adheres to the core values of "integrity, unity, enterprising, innovation and dedication", adheres to the service tenet of "users are God, quality and reputation is life", and produces high-quality products with excellent quality to meet the needs of customers. Suzhou Royal cleanland Electric Co., Ltd. is willing to cooperate with you hand in hand to create brilliant tomorrow!